FishProfiles.com Message Forums |
faq | etiquette | register | my account | search | mailbox |
3 Tanks | |
phishin09 Small Fry Posts: 5 Kudos: 5 Votes: 0 Registered: 25-Sep-2006 | I have three tanks: A hex 1 Gallon, a 10 gallon, and a 29 gallon. As of yet, only the 10 is up and running. When i get the other two, what do i do with them. is there a shelf i can build? I only have a desk. it is 46 inches across. do i need more room? Any feedback is good feedback. Fish or cut bait. |
Posted 25-Sep-2006 23:22 | |
keithgh *Ultimate Fish Guru* Posts: 6371 Kudos: 6918 Votes: 1542 Registered: 26-Apr-2003 | A well made and sturdy desk would hold that weight but as far as space there would not be much left. You could put the 1G and 10G on the desk easly providing you have the space and get a stand for the 29G tank. Do you have room for a small tank stand? Also could you make a small tank stand from a working drawing? Have a look in [link=My Profile] http://www.fishprofiles.com/forums/member.aspx?id=1935[/link] for my tank info Look here for my Betta 11Gal Desktop & Placidity 5ft Community Tank Photos Keith Near enough is not good enough, therefore good enough is not near enough, and only your best will do. I VOTE DO YOU if not WHY NOT? VOTE NOW VOTE NOW |
Posted 26-Sep-2006 02:48 | |
phishin09 Small Fry Posts: 5 Kudos: 5 Votes: 0 Registered: 25-Sep-2006 | I am a pretty good wood worker, so, probobly Fish or cut bait. |
Posted 26-Sep-2006 03:51 | |
FRANK Moderator Posts: 5108 Kudos: 5263 Votes: 1690 Registered: 28-Dec-2002 | Hi, Keep in mind the word "Sturdy" when thinking of supports for any aquarium. As a rule of thumb, the average tank weighs 10 pounds per gallon. Some tanks are much heavier when additional rocks are added for decoration or to build caves, etc. Also keep in mind that, over time, some woods will warb both from the weight, and from the moisture associated with the tanks. The warping will cause undue stress on the glass panes that make up the tank and the joints as well, causing cracking and splitting of the seams. A 29 gallon tank, weighing at a minimum of 290 pounds set in the middle of a desk will eventually warp the desk surface and cause a problem. Frank -->>> The Confidence of Amateurs, is the Envy of Professionals <<<-- |
Posted 26-Sep-2006 16:00 | |
phishin09 Small Fry Posts: 5 Kudos: 5 Votes: 0 Registered: 25-Sep-2006 | I was thinking about buying an 8 foot 4x4 and cutting to posts to support my desk. would this work? Fish or cut bait. |
Posted 26-Sep-2006 23:25 | |
FRANK Moderator Posts: 5108 Kudos: 5263 Votes: 1690 Registered: 28-Dec-2002 | Hi, Without seeing any drawings, I would hesitate to say yes or no. It would depend upon where, and how, you are going to use the 4x4s. Frank -->>> The Confidence of Amateurs, is the Envy of Professionals <<<-- |
Posted 27-Sep-2006 00:39 | |
keithgh *Ultimate Fish Guru* Posts: 6371 Kudos: 6918 Votes: 1542 Registered: 26-Apr-2003 | I will go further than Frank and say legs alone will not support much at all. Qualifications for saying this Cabinet maker trade instructor for 26 years and 10 in the trade before that. I would want to see a working drawing before I would give any support for just adding that timber. Have a look in [link=My Profile] http://www.fishprofiles.com/forums/member.aspx?id=1935[/link] for my tank info Look here for my Betta 11Gal Desktop & Placidity 5ft Community Tank Photos Keith Near enough is not good enough, therefore good enough is not near enough, and only your best will do. I VOTE DO YOU if not WHY NOT? VOTE NOW VOTE NOW |
Posted 27-Sep-2006 08:02 |
Jump to: |
The views expressed on this page are the implied opinions of their respective authors.
Under no circumstances do the comments on this page represent the opinions of the staff of FishProfiles.com.
FishProfiles.com Forums, version 11.0
Mazeguy Smilies