FishProfiles.com Message Forums

I want to build a few custom stands, and I would like to know what the best material is for this. I also would like to know what the best way to go about this. I have never really done this before, however I know a few people who are REALLY good with carpentry and such, and I am sure they would be glad to help me if needed. However, I don't know whether there is one type of wood that is better than other types of wood for starters. If you guys could jsut give me a few pointers on the over all "building experience" I would really appreciate it!

check out [link=This page]http://www.garf.org/tank/buildstand.asp" style="COLOR: #FFFF00[/link] for a nice write up.

Marine grade plywood or better (something sealed at least) would be best.

I could not get the page to show. Maybe if you post it again...

it's http://www.garf.org

Off to the left, under DIY should be Stand building.

Dvmchrissy

I have designed a very basic stand that can be used for many different size tanks.

I will PM you with my E/m and you can contact me. I think I should be able to help you. My experience 26 years teaching Cabinet making, plus 10 years in the trade.

Here is my latest effort

[link=Betta 11Gal Desktop & Placidity 5ft Community Tanks]http://photobucket.com/albums/b209/keithgh/Betta%20desktop%20tank/" style="COLOR: #00FF00[/link]

Keith

Near enough is not good enough, therefore good enough is not near enough, and only your best will do.
I VOTE DO YOU if not WHY NOT?
VOTE NOW VOTE NOW

Plan sent today

Keith

Near enough is not good enough, therefore good enough is not near enough, and only your best will do.
I VOTE DO YOU if not WHY NOT?
VOTE NOW VOTE NOW

Thanks I can't wait to try it out!!! I will let you knwo how it goes when I get it finished!

hey keith im always on the lookout for more diy ideas , could you send me a copy of the plans too?

thanks dan

Last edited by dan76 at 20-Oct-2005 03:44

OH TOLEEDY!

I built my own. Most of the stands in the 100 - 150 dollar price range were kind of cheesy IMO. The frame is built with 2 x 4's and I cased it with furniture grade plywood. I cheated on the corners and instead of miter cuts I attached wood corner moldings used for installing wood paneling.



Last edited by johnnyav at 09-Nov-2005 01:04

This is it.....

johnnyav attached this image: